Forklifts Consultants: 6

Transportation & Safety Compliance Experts, Inc. is a full-service Transportation Consulting Firm that offers a wide variety of services, including OSHA Expert services. Built on the expertise of former OSHA regulators, they exist to provide accurate, affordable safety and compliance solutions. Our OSHA team works with both sides of OSHA regulations and commands a thorough understanding of the system. It’s the reason why attorneys call on them as expert witnesses and clients trust our services.

The team at Transportation Compliance Experts have the technical knowledge and in-the-trenches experience to set them apart. They've worked both sides of DOT regulations and command a thorough understanding of the system.

Business Consultant Services:

Stephen L. Day, CSP, OSHA Assistant Area Director (Retired) for the Federal Occupational Safety and Health Administration, US Department of Labor currently coordinates and manages all aspects of OSHA Safety and Compliance Programs for Transportation Compliance Experts, Inc. 

Mr. Day performs mock OSHA audit evaluations for hourly and retainer consulting clients and represents clients during and subsequent to OSHA audit events. He also performs OSHA compliance and safety related expert work for insurers, counselors, and other interested parties. His work includes both consultation and court testimony.  

In his role as OSHA Assistant Area Director for the US Dept. of Labor, Mr. Day directed and managed OSHA regulatory enforcement actions regarding complaints, accident, and fatality investigations in order to ensure occupational safety and health and compliance with federal OSHA regulations, including but not limited to construction, general industry, chemical manufacturing, petroleum refining, healthcare, auto manufacturing, sawmills, logging, steel erection, long shoring and maritime settings.

Jeff Funke, MS, CSP, is an Industrial Hygiene Expert who serves as an Occupational Safety and Health Administration (OSHA) subject matter expert to industry clients and legal counsel on a wide range of occupational safety and health matters specifically related to Employer Obligations under the OSH Act.

Mr. Funke is an Experienced safety and health professional with extensive knowledge of industrial hygiene principles and feasible application in the workplace. He provides expert guidance on the nature and scope of jurisdictional applicability of the OSH Act related to different aspects of the workplace regarding the regulatory requirements of 29 CFR 1910 General Industry and 29 CFR 1926 Construction.

 With decades of experience, he is proficient at identifying a wide range of hazards in various industries, including construction, manufacturing, agriculture, and numerous other specialty industries.

View Transportation Compliance Experts, Inc.'s Expert Witness Profile.

Rocky Mountain Safety Consulting, Inc. (RMSC), formulates effective and workable Safety Solutions tailored to unique business operations. A well-functioning, self-sustaining safety program avoiding incidents eliminates project slowdown, costly damage to equipment, tough questions from clients, and, most importantly, injury to employees. RMSC provides services to the construction, manufacturing, mining, and oil and gas industries. 

RMSC Consulting Services:

• Safety Programs - Draft and implement safety programs followed by training of crews and management. JSA's and JHA's, weekly safety talks focused on work tasks
• EHS Programs - Develop and implement safety audit programs complying with OSHA and MSHA standards
• Field Auditing - Create and implement field safety audit systems, tracking deficiencies, and correction timelines and accountability. Jobs Safety Analysis implementation

Principal, Greg Gerganoff, ASP, CSP, Esq., is an OSHA / MSHA Safety field and compliance expert in the fields of heavy construction, oil and gas, mining, pipeline, power plant outages, light rail construction, public schools, manufacturing, and trenching and excavation. 

As OSHA and MSHA are not mere “guidelines to safety” but federal laws enforceable in administrate hearings and federal courts, Mr. Gerganoff's 12 years of experience as a Licensed Attorney, and additional 17 years as a safety professional, make him uniquely qualified to research and interpret OSHA regulatory laws (29 CFR 1910 & 1926) and MSHA (30 CFR Part 46). He maintains his license to practice law in the state of Colorado. 

Safety Training includes but not limited to:

View Greg Gerganoff's Expert Witness Profile.

Quality Forensic Engineering, LLC is a full-service forensic engineering firm, providing engineering support to clients in the areas of accident reconstruction, biomechanics, fire investigations, patent litigation analysis, premises liability, product liability, and tire failure analysis. We use the latest technology and industry proven techniques to provide thorough analysis and conclusions for the most difficult engineering questions. Our forensic engineers support clients throughout the U.S. Our locations include Tallahassee, FL; Jacksonville, FL; Tampa, FL; New Orleans, LA; San Diego, CA; and Tucson, AZ.

Traci K. Campbell, PE, CFSE, CXLT, has over 22 years of experience investigating, analyzing, and testifying in matters involving a variety of forensic engineering issues. Ms. Campbell has a strong background working in manufacturing and industrial workplaces including the design, development, and implementation of solutions to ensure safe work environments. She has also been credited as part of a team holding a patent related to safeguarding power hand tools with rotating discs. 

Ms. Campbell's special interests include amusement park and theme park accidents and safety related issues. She is also a CFSE – Certified Forensic Slip Expert, CXLT – Certified XL Tribometrist (slip index evaluation) and a certified counter balance forklift operator. Ms. Campbell has served as a presenter with the American Society of Safety Professionals (ASSP) regarding slip, trip, stumble, and fall incidents. She has shared her engineering expertise with many organizations on topics including: slip, trip, stumble, and fall incidents; electronic data in the realm of accident reconstruction; safety engineering and the engineering hierarchy; photogrammetry and other accident reconstruction techniques; OSHA compliance; and Industrial Engineering. 

Ms. Campbell is a registered and licensed Professional Engineer in five states and she continues to refine her skills and knowledge of premises liability and safety engineering by staying current with new technology and best practices.

See Full Bio & CV.

Expertise:

Brian A. Darr, P.E. IAAI-FIT(V), CFEI, has over 25 years of engineering experience which includes Tire Failure analysis on many types of tires (passenger, light truck, radial medium truck, retreads, motorcycle, etc.), Vehicle and Residential Fire Origin and Cause investigations, vehicle accident reconstruction for passenger and commercial vehicles, motorcycles, vehicle component failure analysis, and insurance fraud/consistency evaluations. He also conducts crash data retrieval (CDR) downloads for passenger vehicles and engine control module (ECM) downloads for commercial vehicles. Mr. Darr evaluates traffic signal timing relating to intersection collisions. He provides services in product and material failure analysis, cause analysis of plumbing failures, mechanical equipment and machinery failures, lightning strike investigations, nondestructive examinations and testing, product design and assessment of conformance to government, corporate, industry, safety, and international standards.

Mr. Darr has over 25 years of extensive experience with tires including design, development, manufacturing, quality investigation, race tire preparation, and testing of tires at numerous testing facilities. He worked in a tire manufacturing facility as a plant technical engineer where he investigated quality related issues, and in a Research & Development (R & D) center where he designed, developed, tested, and analyzed tires. Mr. Darr has visited numerous tire production plants such as Goodyear, Bridgestone, Michelin, and Continental tire. He has inherent knowledge of the PAX run-flat tire system and C3M manufacturing process. He also was responsible for verifying standards and regulations were met, related to tire product and tire pressure monitoring sensors.

Mr. Darr has been qualified as a tire expert in State and Federal court. He has completed forensic tire failure analysis on many types of tires in which he referenced hundreds of publicly available tire related documents. He reviews forensic tire reports from outlying offices along with providing marketing support and giving seminars nationwide. He has conducted numerous vehicle and residential fire origin and cause investigations with various findings including fires that were intentionally set, accidental, and electrical in nature. He has also conducted fire suppression system investigations. 

Mr. Darr holds multiple fire certifications and designations with the International Association of Arson Investigators and the National Association of Fire Investigators. 

See Full Bio & CV.

Expertise:

View Quality Forensic Engineering's Accident Reconstruction Consulting Profile.

Dr. J.P. Purswell, PhD, PE, CPE has extensive experience in Human Factors, Ergonomics and Safety Engineering. He has completed projects for clients in all these areas and regularly teaches ergonomics and safety engineering at Colorado State University. 

Dr. Purswell Consults with Manufacturers on Product Safety Issues, including Warnings and Instructions. He also Consults with Employers regarding the development and implementation of safe and ergonomically sound work practices, including the identification and control of ergonomic risk factors for back injuries and upper extremity cumulative trauma disorders. 

Dr. Purswell has prepared ANSI Z535 compliant instructions and warnings for attic ventilators, deer-stands, LPG hoses, ammonia hoses, warehouse rack systems, and arts and craft products among others. He has also prepared ANSI Z129.1 compliant warnings for a range of chemical products from gasoline pump warnings to brake pads and ammonia hoses, and OSHA and ANSI Z400.1 compliant material safety data sheets for several chemical manufacturers. 

He is the author of more than 20 publications or presentations on product safety, occupational safety, printed warnings, and auditory warnings. He has been inducted into Alpha Pi Mu, the Industrial Engineering Honor Society and is a recipient of the Gordon Fellowship from the University of Oklahoma. 

Consulting Services:

• Design and Testing of Instruction Manuals and on Product Warnings
• Usability Testing of Products for Ease-of-Use and Safety
• OSHA Audits for Employers
• Employer Training - Benchmarking Safety Performance Against a Company's Industry
• Employer Training - How to Prepare For OSHA Inspections

View Dr. Purswell's Expert Witness Profile.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

David Smith is an experienced mechanical engineer (MS, PE) with seven issued patents. Award-winning inventor. Vice President of Alpine Engineering and Design, a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Worked on the development of multiple successful products including among other things: aerial lifts, garbage trucks, thrill rides, ziplines, trailers, oil and gas equipment, exercise equipment, manufacturing equipment, and multiple consumer products. 

Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and certified safety professional in comprehensive practice (CSP). Certified trainer for boom lifts, scissor lifts, rough terrain, and counterbalanced forklifts. Over 10 years of experience in product development, patents, equipment safety, and risk assessments. 

Experienced expert witness having drafted over 200 reports/declarations in patent cases and catastrophic injury and death cases. Designed and built multiple custom testing devices to obtain data and evaluate opinions. Created multiple demonstratives to explain the mechanics and circumstances of accident sequences and patented devices. Testified in deposition 11 times and in trial once.