Occupation Health & Safety / OSHA Compliance Consultants: 39

Ronald Tyson is a Building and Premises Expert in the construction business for over 45 years.  He has years of hands on experience in the individual trades as a tradesman, subcontractor and general contractor.  

Mr. Tyson has been a Michigan licensed builder since 1967 and has functioned as a general contractor and provided supervisory tasks for Tyson Enterprises, Incorporated and other contractors on all types of industrial, public, commercial and residential construction projects since 1963. He is a member of numerous building code and standard authorities, including but not limited to IBC [BOCA, UBC] NFPA, IAEI, NAHB, etc.

Mr. Tyson's experience and expertise can help clients with contracts, safety, and other obligations as they may affect project control of contractors and/or project managers.  He can advise on the duties in new and remodeling construction and maintenance required by the premises owner.

Litigation Support - Mr. Tyson has served the legal community as a Construction Expert Witness for 35 years. He has worked for both plaintiff and defendant attorneys. He is available to perform onsite inspections, research, review litigation matters, makes drawings, interview litigants, and provides evidence for court, including correct building code and life safety statutes and standards as they may affect personal injury claims, construction, contracts, etc. and causation.  Mr. Tyson has never been disqualified in over 200 times in court.

Areas of Expertise:

Building Codes Construction Life Safety Standards OSHA & MIOSHA Claims ADA Claims Premises Liability Foreseeability Building Mold

Faulty Construction Latent Building Defects Failure to Disclose Personal Injury Manufactured Housing Condominium Claims Breach of Contract

 

Transportation & Safety Compliance Experts, Inc. is a full-service Transportation Consulting Firm that offers a wide variety of services, including OSHA Expert services. Built on the expertise of former OSHA regulators, they exist to provide accurate, affordable safety and compliance solutions. Our OSHA team works with both sides of OSHA regulations and commands a thorough understanding of the system. It’s the reason why attorneys call on them as expert witnesses and clients trust our services.

The team at Transportation Compliance Experts have the technical knowledge and in-the-trenches experience to set them apart. They've worked both sides of DOT regulations and command a thorough understanding of the system.

Business Consultant Services:

FMCSA / OSHA Audit & Mock-Audit Data Q Challenges Safety Department Outsourcing Employee Training & Development Employee Background Checks

Drug & Alcohol Testing (TPA Service) Motor Vehicle Reports Hazardous Material Employee Security Screens Hazmat Security Plan Template

Stephen L. Day, CSP, OSHA Assistant Area Director (Retired) for the Federal Occupational Safety and Health Administration, US Department of Labor currently coordinates and manages all aspects of OSHA Safety and Compliance Programs for Transportation Compliance Experts, Inc. 

Mr. Day performs mock OSHA audit evaluations for hourly and retainer consulting clients and represents clients during and subsequent to OSHA audit events. He also performs OSHA compliance and safety related expert work for insurers, counselors, and other interested parties. His work includes both consultation and court testimony.  

In his role as OSHA Assistant Area Director for the US Dept. of Labor, Mr. Day directed and managed OSHA regulatory enforcement actions regarding complaints, accident, and fatality investigations in order to ensure occupational safety and health and compliance with federal OSHA regulations, including but not limited to construction, general industry, chemical manufacturing, petroleum refining, healthcare, auto manufacturing, sawmills, logging, steel erection, long shoring and maritime settings.

Jeff Funke, MS, CSP, is an Industrial Hygiene Expert who serves as an Occupational Safety and Health Administration (OSHA) subject matter expert to industry clients and legal counsel on a wide range of occupational safety and health matters specifically related to Employer Obligations under the OSH Act.

Mr. Funke is an Experienced safety and health professional with extensive knowledge of industrial hygiene principles and feasible application in the workplace. He provides expert guidance on the nature and scope of jurisdictional applicability of the OSH Act related to different aspects of the workplace regarding the regulatory requirements of 29 CFR 1910 General Industry and 29 CFR 1926 Construction.

 With decades of experience, he is proficient at identifying a wide range of hazards in various industries, including construction, manufacturing, agriculture, and numerous other specialty industries.

View Transportation Compliance Experts, Inc.'s Expert Witness Profile.

Dr. William R. Sawyer  is a Professional Toxicologist with a doctorate in toxicology from Indiana University School of Medicine. He has over 32 years of extensive experience in Public Health and Forensic Toxicology. Forensic Environmental & Laboratory Analyses. Through education and experience, Dr. Sawyer has gained extensive expertise in Forensic Petroleum Analyses, Environmental and Clinical Forensic Analyses. 

With over 23 years of laboratory experience and over 14 years experience as a licensed environmental and forensic laboratory director in New York State, he has directed forensic laboratory analyses, sampling protocol and chain-of-custody in criminal and civil matters and has provided petroleum spill assessments to multiple clients including governmental environmental agencies (NYSDEC), Departments of Justice, various State Attorney General Offices (New York, Montana), defense and plaintiff law firms and industry. Petroleum spill and exposure assessment reports have provided an objective determination to within a reasonable degree of scientific certainty. 

Dr. Sawyer is a noted author having written numerous publications, abstracts, treatises and editorials on subjects within his field of expertise. He has also delivered professional presentations on the "Fundamentals of Medical Toxicology" and "Reactive Airways Dysfunction Syndrome (RADS)" to such entities as The American Board of Forensic Medicine & The American College of Forensic Examiners among others.

 

Lisa Myers interviews Dr. Sawyer on NBC Nightly News

As a Board Certified Toxicologist, Dr. Sawyer provides impartial toxicological evaluations involving:

Chemical Exposures Petroleum Product Exposures Alcohol Ingestion Intentional Poisons Involved in Homicides Carcinogens

Pharmaceuticals Pyrolysis Products Heavy Metals Organic Chemicals Drugs of Abuse

View Dr. William Sawyer's Expert Witness Profile.

Bransford Pickett, PE, BSc, MScBA, has over 25 years of experience as a Mechanical Engineer. A California Registered Professional Engineer, Mr. Pickett holds a BSE from the University of Michigan, Ann Arbor, and a MScBA in Finance from San Diego State University. His Materials Handling and Engineering Consulting Services are offered to insurance and end user companies nationally and internationally. The combination of field expertise, engineering, and regulatory compliance experience provide Mr. Pickett's clients with a complete package of services. The depth and breadth of his expertise covers many successful design projects including commercial and military ships, many complex material handling activities, testing requirements of shipboard system, and development and implementation of compliance programs. Many of the major projects include first of a kind challenges such as the Exxon Valdez post - accident docking and structural repairs, commission testing of navy auxiliary ships’ equipment including fueling systems, the US Navy Shughart Class Container Ship Conversion program, as well as shaft and appurtenance handling on the US Navy Watson Class ships. Included in these projects were planned engineered multi - crane lifts that reached in excess of 400 tons. These projects focused on safe, economic, simple designs compliant with applicable state and federal regulations, and national standards.

Engineered Material Handling Design and Review:

• Services include single and multi-crane lift plans, material transport, and equipment testing. Design, review and analysis of supporting calculation of stresses imposed on lifting, supporting structure, and material handling equipment, and rigging gear. Equipment specification scope and review

Naval Architecture & Marine Engineering:

• Perform intact, damage and probabilistic damage stability, and structural analysis on marine structures including barges, ships, and complimentary structures in accordance with regulatory bodies; ABS, Federal or State government

Training and Compliance:

• Operator training compliance to National Commission for the Certification of Crane Operators, NCCCO, requirements for tower crane, mobile crane, overhead crane, articulating crane operator training and certification, signal person, and rigger certification
• Compliance covers applicable national and international standards that include the ABS, ASTM, ASM, ASME, ANSI, WSTDA, ALI, etc. and DIN, EN, FEM to list a few. National regulations include state and federal OSHA requirements as well as DOE, military specifications and standards

View Bransford Pickett's Expert Witness Profile.

Michael C. Wright, PE, CSP, CPE is a Professional Engineer with over 35 years of academic, practical, and specialized knowledge of Engineering, Construction, Safety, Maintenance, Demolition and Training in general industry and construction activities.

 Mr. Wright's expertise is a definite plus in providing clients with leading edge information and insight. A licensed and practicing engineer, he rounds out his knowledge as a Certified Safety Professional (CSP) and Certified Plant Engineer to provide an insightful and accurate understanding of the issues involved in a case.

Mr. Wright has completed over 600 hours of specialized safety training, serves on ANSI and ASTM Standards committees and provides a thorough knowledge of OSHA Regulations, Directives and Letters of Interpretation. A recognized author, presenter, and trainer, Mr. Wright communicates the issues clearly for all to understand. His expert witness experience is a balanced blend of defense, plaintiff and OSHA Solicitor cases. He is licensed in 46 states. 

Areas of Expertise:

Safety Programs Construction Product Liability Fall Protection Programs Suspended Loads Contractors Formwork Leading Edge Work Activities Machine Guarding Safety Concrete, Wood, Steel Ladder Safety

Aerial & Scissor Lifts Anchorage Points - Fall Arrest Programs Bleachers Scaffolding Multi-Employer Concrete Formwork Construction & Demolition Roofing Crane Design & Inspection Training Safety Programs (Customized Manuals)

View Mr. Wright's Curriculum Vitae

Rocky Mountain Safety Consulting, Inc. (RMSC), formulates effective and workable Safety Solutions tailored to unique business operations. A well-functioning, self-sustaining safety program avoiding incidents eliminates project slowdown, costly damage to equipment, tough questions from clients, and, most importantly, injury to employees. RMSC provides services to the construction, manufacturing, mining, and oil and gas industries. 

RMSC Consulting Services:

• Safety Programs - Draft and implement safety programs followed by training of crews and management. JSA's and JHA's, weekly safety talks focused on work tasks
• EHS Programs - Develop and implement safety audit programs complying with OSHA and MSHA standards
• Field Auditing - Create and implement field safety audit systems, tracking deficiencies, and correction timelines and accountability. Jobs Safety Analysis implementation

Principal, Greg Gerganoff, ASP, CSP, Esq., is an OSHA / MSHA Safety field and compliance expert in the fields of heavy construction, oil and gas, mining, pipeline, power plant outages, light rail construction, public schools, manufacturing, and trenching and excavation. 

As OSHA and MSHA are not mere “guidelines to safety” but federal laws enforceable in administrate hearings and federal courts, Mr. Gerganoff's 12 years of experience as a Licensed Attorney, and additional 17 years as a safety professional, make him uniquely qualified to research and interpret OSHA regulatory laws (29 CFR 1910 & 1926) and MSHA (30 CFR Part 46). He maintains his license to practice law in the state of Colorado. 

Safety Training includes but not limited to:

PEC SafeLand Core and Basic OSHA 10 & 30 Hour Outreach Trainer Gen Industry H2S Training (in accord with ANSI Z390.1-2006) MSHA New Miner (Surface Metal and Nonmetal) Aerial / Man Lift Operator Training Power Tool Safety and Inspection

Hazard Communication Lockout / Tagout Confined Space Trench and Excavation Fork Lift Operator Training / Lifting Fall Protection

View Greg Gerganoff's Expert Witness Profile.

Rieser Building Group is a leading builder, engineer, architect, and forensic team with over 25 years of experience in management, design, and construction of over 4,000 units. These units range from custom homes, commercial buildings, and developments, to public works like Caltrans and BART construction, and roadway improvements (over 500 miles). With a full breadth of professional development services, they manage all aspects of a project, from entitlements to design to warranty.

Building Services - Design in-house, or, as licensed engineering and construction professionals, Rieser Building Group can manage an outside team of architects, civil engineers, structural engineers, and landscape architects.

Engineering and Design Services - Spearheaded by a professional Engineering & Architectural team, Rieser provides innovative designs and timely approvals in custom homes, commercial buildings, apartments, large developments, structures, topo-mapping, hydraulics, traffic engineering, and transportation engineering.

Development Services - Developing single custom-built home or a multiphase project, Rieser will expedite the development process, establish a joint venture to share costs, or purchase the project. In addition to flexible management, they conduct property feasibility studies to calculate the right mix of homes and maximize ROI. 

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC, has over 30 years of experience in the Construction and Building Design industry. He provides his clients with a comprehensive knowledge of Construction Technology and Construction Standards of Professional Practice. Background Experience - President of an active Design / Build company, Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes construction, management, and design of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrain, and BART. Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation / Traffic Engineering, Hydraulic Engineering, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert.

NorCal Headquarters San Jose Office 2033 Gateway Pl Suite 500 San Jose, CA 95110	San Francisco Office 425 Market St Suite 2200 San Francisco, CA 94105	SoCal Headquarters Los Angeles Office 10100 Santa Monica Blvd. Suite 300 Los Angeles, CA 90067	Sacramento Office 777 Campus Commons Rd Suite 200 Sacramento, CA 95825

View Mark Rieser's Expert Witness Profile.

Retail Expert Witness Corp is a multi disciplined retail store planning company. With over 30 years of experience, they have elevated their reputation to among the most respected and acclaimed Store Planning Firms in the United States.

Consulting Expertise Includes:

Store Design Store Design and Display

Showroom Design Trade Show Concepts

Founder, Jerry Birnbach, FISP, Associate AIA, is an award winning Retail Designer of Stores and Displays. He has 40 years of exclusive retail consulting with Americas largest retailers and product vendors. Mr. Birnbach is listed as a Top 40 Retail Industry Leader. He is considered an Expert on all things Retail. 

Industry magazines have recognized Jerry Birnbach and Associates as a top 50 Retail Design Firm. They have received VMSD for best specialty store design award for successories, the POPAI award for the best display design for Revlon sunglasses, the DDI Global Shop Magellan award for marketing and graphic design, and the IMRA Best Trade Booth Design award.

Mr. Birnbach served as a Partner at RDD Associates Inc., designing high profile prototype stores and departments for Walmart, Macy's Target, Crayola, Ringling Bros., Fleet Center Arena, Conair, DKNY, XOXO, and Mizrachi. He has complete knowledge from construction to grand opening and every aspect of retailing in between.

View Jerry Birnbach's Expert Witness Profile.

Restaurant Consulting Innovations (RCI) provides services to the Restaurant / Food Services Industry, whether for new development, existing concept re-development and enhancement, or salvaging a company in crisis. RCI provides a highly focused and effective approach from evaluation to implementation of solutions to benefit their clients in the most efficient manner.

Clients List - Joe's Crab Shack, Cask ‘n Cleaver, Lord Charlie’s, El Gato Gordo, Pizza Pronto, Safari Bar Restaurant, Shark Club, Bull Dog Grill, Stronghouse, Pangea, The Ballroom, Juarez Grill, Dickerson’s Club 29, Yucatan Liquor Stand, Zepp’s Atomic Tex Mex, Cabo Grill, Angel Stadium, In Cahoots, The Ball Room, Slick Willie’s, Rodeo, Jake’s, Bobs on the Bay, Crabby Bob’s Seafood, PizzaRev, Honolulu Harry’s, Lahaina Mai Tai Lounge, Canyon Grill, Campagnia, Huey’s Grill & Brewery, Gladstone’s Long Beach, Pro’s Ranch Markets, Lily's Doughnuts & Pops

Consultant Services:

• Design Build Management - Design from Culinary Vision to Construction Documentation, Full Project Management / Installation, Consolidation and Delivery, Site Surveys to Determine Operational Efficiencies, Custom Stainless Fabrication, GPO Procurement Power
• Business Coaching - Leadership Development & Accountability, Performance Optimization, Franchise Model Development, Value Enhancement to Sell or Leverage Bank Financing, Business Performance Reviews, Strategic Planning, Business Turnarounds, New Concept Development
• Industries Served - Independent Restaurants, Multi Unit Operators, New Concepts & Emerging Brands, Franchise Companies, Food-service Suppliers, Hotel Food & Beverage, Investors / Private Equity / Landlords, Wineries, and Virtual Kitchens

Gary R. Coburn, Principal at RCI,  is an award-winning Restaurant Executive with 40 years of experience creating, opening, running, and advising hundreds of full service restaurants, limited service, quick-service, bars and nightclubs. Additional expertise in restaurant franchising and commercial kitchen design/build from remodels to ground up including conceptual development, viability and business interruption.

With over four decades in the industry, Mr. Coburn has held positions as VP of National Accounts and Design Build for the largest commercial kitchen and distribution company in the country to, Director of Operations, President, COO, Executive Director of Food Services and owner operator. His management experience has included supervising more than 2,000 employees, including 170 managers, along with overseeing consulting assignments for numerous companies.

View Gary R. Coburn's Expert Witness Profile.

Summary

Trusted by clients since 2001, Rauch Safety & Engineering specializes in guiding private and public clients through Complex Fall Protection and Confined Spaces Infrastructure Access and Maintenance projects across specific industry sectors and markets utilizing our global network of resources to provide comprehensive world class advisory and management services.

Infrastructure designs for newly built or modernization projects are becoming increasingly complex, presenting a challenge for future inspections and maintenance. The ability to safely, efficiently and cost effectively perform these critical services is an important component in maximizing investment and stakeholder expectations over the long term, while remaining true to the original design intent.

Rauch provides a value not currently available in the market, our scope of work is comprehensive, providing world class advisory and management services that run concurrently from the early design phase, through to vendor selection, equipment turnover, commissioning and training and if required, unbiased and impartial mediation in the event of dispute.

With methods and principles that reflect that of our architectural, engineering and contractor clients, who combine creative investigation, strong technical integration and long-range vision with conscientious adherence to a project’s goals and objectives, Rauch since 2001, has delivered over 1000 projects worldwide and we look forward to continuing to partner with our existing and new clients to deliver successful projects in the future.

Principal Areas of Specialization Include:

Design Engineering Retrofit Upgrades Commissioning Installation Service Training Inspections Auditing Evaluation of Corporate Fall Protection Programs and Confined Space Programs

Risk Analysis Infrastructure Access Observation Program (IAOP trade;) Structural & Façade Maintenance Human Factors Engineering Ladders & Scaffolds Horizontal/Vertical Lifelines Safety Engineering Safety Equipment Walking & Working Surfaces OSHA / International / Consensus Standards and Recommendations from other Professional Organizations

• Building Maintenance Units (BMU)
  • Installation & Commissioning – Specialized in commissioning BMUs, site testing, and hand over
  • Upgrades – Upgrades mechanical, electrical and controls to meet regulations and ensure equipment safety
  • Retrofit – Complete refurbishment, replace platform, mechanical, hydraulic, electrical and control system or Complete replacement
  • Service & Maintenance – Perform required 30 days service & inspection, 6 months, and 12 months service as per OEM specification
  • Training - Train on how to use BMU and operate under an agreement with OEM
  • Loading testing as per OSHA and/or in country and local Standards & Recertification
• Custom Access Equipment
  • Installation & Commissioning – Commission, site testing, and hand over. Rauch can commission any equipment under the guidance of manufacture
  • Upgrades – Upgrades mechanical, electrical and controls to meet regulation and ensure equipment safety
  • Retrofit – Complete refurbishment or Complete replacement
• Lifeline Systems
  • Installation of Hands-Free system or dog lines as per OEM specification
  • Loading testing as per OSHA and/or in country and local Standards & Recertification

Infrastructure Applications Include:

Airports Bridges Buildings Dam Mining

Industrial Facilities Plants Power Supply & Transmission Shipping Towers

Current and Past Memberships & Affiliations

• Society for Protective Coatings (SSPC)
• Design Build Institute of America (DBIA)
• The Society of Naval Architects and Marine Engineers (SNAME)
• Building Owners and Managers Association (BOMA)
• National Shipbuilding Research Program (NSRP ASE)
• National Association of Corrosion Engineers (NACE)
• India Electrical & Electronics Manufacturers’ Association

View Rauch Safety and Engineering's Expert Witness Profile.

R. Kevin Smith PE, BSME, MMAE, has been a specialist in Engineering Forensic Safety and Design for 35 years. He has consulted on over a 1,000 matters nationwide.

Mr. Smith is a registered professional engineer and holds a BSME and MMAE from the Illinois Institute of Technology in Chicago. He specializes in Material Handling Equipment Safety, including lift trucks, dock safety, truck loading, conveyors, and aerial work platform safety.

Mr. has been actively involved as a member of the committee that writes the Safety Standard for Low Lift and High Lift Trucks (ASME/ANSI B56.1) for over 30 years. He also serves on the B56.6 committee (rough terrain lift trucks) and the ANSI A92.5 and A92.6 subcommittees (self-propelled elevating work platforms).

Litigation Support - Mr. Smith formerly worked for Triodyne, Inc. for over 15 years as a forensic engineer/principal engineer. As President of R. K. Smith Engineering Inc., he currently has a laboratory for examination and testing, and owns or has access to varied testing equipment and tools.

Kevin Smith has testified at depositions and trials on several hundred matters. He has performed hundreds of investigations into product failures involving injury and property damage, and has reconstructed numerous accidents. His expertise is available to counsel representing both Plaintiff and Defendant. Mr. Smith also is on the Adjunct Math faculty at Prairie State College.

Areas of Expertise:

Forklift Trucks Aerial Work Platform Lifts Product Testing Material Handling / Lifting / Rigging Equipment Accident Reconstruction Machine Guarding Safeguarding Warnings

Agricultural and Construction Equipment Skid Steer Loaders Stability Testing Loading Dock Safety Consumer Products / Testing OSHA Citations Codes & Standards Standard of Care in Design

View R. Kevin Smith's Expert Witness Profile.

Quality Forensic Engineering, LLC is a full-service forensic engineering firm, providing engineering support to clients in the areas of accident reconstruction, biomechanics, fire investigations, patent litigation analysis, premises liability, product liability, and tire failure analysis. We use the latest technology and industry proven techniques to provide thorough analysis and conclusions for the most difficult engineering questions. Our forensic engineers support clients throughout the U.S. Our locations include Tallahassee, FL; Jacksonville, FL; Tampa, FL; New Orleans, LA; San Diego, CA; and Tucson, AZ.

Traci K. Campbell, PE, CFSE, CXLT, has over 22 years of experience investigating, analyzing, and testifying in matters involving a variety of forensic engineering issues. Ms. Campbell has a strong background working in manufacturing and industrial workplaces including the design, development, and implementation of solutions to ensure safe work environments. She has also been credited as part of a team holding a patent related to safeguarding power hand tools with rotating discs. 

Ms. Campbell's special interests include amusement park and theme park accidents and safety related issues. She is also a CFSE – Certified Forensic Slip Expert, CXLT – Certified XL Tribometrist (slip index evaluation) and a certified counter balance forklift operator. Ms. Campbell has served as a presenter with the American Society of Safety Professionals (ASSP) regarding slip, trip, stumble, and fall incidents. She has shared her engineering expertise with many organizations on topics including: slip, trip, stumble, and fall incidents; electronic data in the realm of accident reconstruction; safety engineering and the engineering hierarchy; photogrammetry and other accident reconstruction techniques; OSHA compliance; and Industrial Engineering. 

Ms. Campbell is a registered and licensed Professional Engineer in five states and she continues to refine her skills and knowledge of premises liability and safety engineering by staying current with new technology and best practices.

See Full Bio & CV.

Expertise:

Industrial Accidents Slips, Trips & Falls Human Factors and Environment Interaction Pedestrian Kinematics Workplace Safety Retail and Restaurant Facility Safety OSHA & ADA Regulations Multi- Employer Workplaces ANSI, ASTM & Building Codes Elevators/Escalators Industrial Equipment

Forklifts and Material Handling Devices Parking Lot Safety  Safety Engineering Guarding and Warnings Theme Parks & Recreation Facility Safety Fire and Explosion Safety Product Failure Analysis Pedestrian Accidents Automobile Collisions Tractor-Trailer Collisions Bicycle Accidents

Brian A. Darr, P.E. IAAI-FIT(V), CFEI, has over 25 years of engineering experience which includes Tire Failure analysis on many types of tires (passenger, light truck, radial medium truck, retreads, motorcycle, etc.), Vehicle and Residential Fire Origin and Cause investigations, vehicle accident reconstruction for passenger and commercial vehicles, motorcycles, vehicle component failure analysis, and insurance fraud/consistency evaluations. He also conducts crash data retrieval (CDR) downloads for passenger vehicles and engine control module (ECM) downloads for commercial vehicles. Mr. Darr evaluates traffic signal timing relating to intersection collisions. He provides services in product and material failure analysis, cause analysis of plumbing failures, mechanical equipment and machinery failures, lightning strike investigations, nondestructive examinations and testing, product design and assessment of conformance to government, corporate, industry, safety, and international standards.

Mr. Darr has over 25 years of extensive experience with tires including design, development, manufacturing, quality investigation, race tire preparation, and testing of tires at numerous testing facilities. He worked in a tire manufacturing facility as a plant technical engineer where he investigated quality related issues, and in a Research & Development (R & D) center where he designed, developed, tested, and analyzed tires. Mr. Darr has visited numerous tire production plants such as Goodyear, Bridgestone, Michelin, and Continental tire. He has inherent knowledge of the PAX run-flat tire system and C3M manufacturing process. He also was responsible for verifying standards and regulations were met, related to tire product and tire pressure monitoring sensors.

Mr. Darr has been qualified as a tire expert in State and Federal court. He has completed forensic tire failure analysis on many types of tires in which he referenced hundreds of publicly available tire related documents. He reviews forensic tire reports from outlying offices along with providing marketing support and giving seminars nationwide. He has conducted numerous vehicle and residential fire origin and cause investigations with various findings including fires that were intentionally set, accidental, and electrical in nature. He has also conducted fire suppression system investigations. 

Mr. Darr holds multiple fire certifications and designations with the International Association of Arson Investigators and the National Association of Fire Investigators. 

See Full Bio & CV.

Expertise:

Fire Cause and Origin Tire Failure Analysis Vehicle Fire Investigation Residential Fire Investigation Fire Suppression System Investigation Vehicle Accidents Motorcycle Accidents

Vehicle Component Failure Analysis Insurance Fraud / Consistency Evaluations Crash Data Retrieval (CDR) Tractor Trailer Electronic Control Module (ECM) Analysis Product Failure Analysis Lightning Strike Investigation Product Design and  Assessment

View Quality Forensic Engineering's Accident Reconstruction Consulting Profile.

Dr. J.P. Purswell, PhD, PE, CPE has extensive experience in Human Factors, Ergonomics and Safety Engineering. He has completed projects for clients in all these areas and regularly teaches ergonomics and safety engineering at Colorado State University. 

Dr. Purswell Consults with Manufacturers on Product Safety Issues, including Warnings and Instructions. He also Consults with Employers regarding the development and implementation of safe and ergonomically sound work practices, including the identification and control of ergonomic risk factors for back injuries and upper extremity cumulative trauma disorders. 

Dr. Purswell has prepared ANSI Z535 compliant instructions and warnings for attic ventilators, deer-stands, LPG hoses, ammonia hoses, warehouse rack systems, and arts and craft products among others. He has also prepared ANSI Z129.1 compliant warnings for a range of chemical products from gasoline pump warnings to brake pads and ammonia hoses, and OSHA and ANSI Z400.1 compliant material safety data sheets for several chemical manufacturers. 

He is the author of more than 20 publications or presentations on product safety, occupational safety, printed warnings, and auditory warnings. He has been inducted into Alpha Pi Mu, the Industrial Engineering Honor Society and is a recipient of the Gordon Fellowship from the University of Oklahoma. 

Consulting Services:

• Design and Testing of Instruction Manuals and on Product Warnings
• Usability Testing of Products for Ease-of-Use and Safety
• OSHA Audits for Employers
• Employer Training - Benchmarking Safety Performance Against a Company's Industry
• Employer Training - How to Prepare For OSHA Inspections

View Dr. Purswell's Expert Witness Profile.

Page Engineering Inc., established in 1994, is an Ergonomics and Industrial Engineering consulting firm. They have provided services to clients throughout the United States and Canada. Their hands-on approach is backed by the extensive application of ergonomics, human factors, epidemiologic, and occupational medical scientific literature. Page Engineering experience includes conducting ergonomics analyses and research in the railroad industry, primarily, and in heavy industry, in general, for over 22 years. Their clients include Union Pacific Railroad, Kansas City Southern Railways, Association of American Railroads, Fedex, American Petroleum Institute, Food Marketing Institute, Food Distributors International, Blue Water Bridge Authority, and USPS.

Consulting Services - Page Engineering provides ergonomics services, integrating multiple disciplines (industrial engineering, safety, health, business, regulatory) to provide effective results, whether in the application of job analyses and job improvement processes or in physical job demands analyses. Their services include:

• Ergonomics Exposure Analysis and Workplace Improvements
• Ergonomics Design
• Organizational Risk Analysis
• Health and Safety Information Systems Development
• Expert Witness Services

George B. Page, CPE, is a Certified Professional Ergonomist. Since founding Page Engineering, Mr. Page has been providing ergonomics services, integrating multiple disciplines (industrial engineering, safety, health, business, regulatory) to provide effective results, whether in the application of job analyses and job improvement processes or in physical job demands analyses. His experience includes conducting ergonomics analyses and research in the railroad industry and in heavy industry for over 30 years. Mr. Page's expertise includes job exposure assessments, physical demands assessments, accident reconstruction, and forensic engineering.

Greg G. Weames, CPE, CCPE, CRSP, has been a practicing Ergonomist since 1994, after obtaining his B.Sc. and M.Sc. in kinesiology. Mr. Weames has spent several years as a corporate ergonomist for large organizations as well as has worked for several years in consulting. Currently, with Page Engineering, Inc., he has provided expert witness services, consulting services for various facilities projects, workplace, equipment, machine and tool analysis services, and job exposure analysis services. Over his years as an ergonomist, Mr. Weames has co-authored scientific publications, served on Federal, Industry, and Corporate level committees, developed and authored corporate programs and training, and has worked extensively across all departments of organizations, levels of management and employees.

Stephen D. Fleming, CPE, CXLT, is an Industrial Engineer / Ergonomist whose background includes analyzing work environments and work tasks using industrial engineering work measurement methods and risk assessment models for different body regions. His expertise is in assisting industrial clients in applying ergonomics to workplace processes, tools, and equipment, including all major North American railroads, FedEx, Ford Motor Company, Lear Seating, USPS, and the Blue Water Bridge Authority. Mr. Fleming has been acknowledged for developing and implementing a methodology for measuring and analyzing exposure to whole-body vibration (WBV) and hand-arm vibration (HAV).

View Page Engineering's Expert Witness Profile.

Nancy M. McClellan, MPH, CIH, CHMM, is an award winning, Industrial Hygiene and Safety expert with over 25 years of broad international experience practicing, teaching and authoring to anticipate, recognize, evaluate, control and prevent workplace health and safety hazards in high hazard industries.

Ms. McClellan is domestically and internationally recognized for leadership service to the IH profession for the American Industrial Hygiene Association (AIHA), the American Board of Industrial Hygiene (ABIH), the Occupational Hygiene Training Association (OHTA) and the Joint Industrial Hygiene Ethics Education (JIHEEC) Boards of Directors and Committees. She currently serves on the AIHA Executive Board of Directors.

Background Experience:

Technical

• Planned and carried out evaluation and exposure assessment of global drug supply management resulting in >55% reduction in respiratory personal protective equipment in clinical packaging operations. Completed initiative resulted in potential total reduction of >70% respiratory protection equipment as new engineering controls were implemented and evaluated for controlling pharmaceutical dust.
• Developed and executed strategy for assessing potential IDLH chemical release during missile destruction testing. Outcome enabled missile scientists to safely enter the test site and collect time-critical data.
• Provided expert witnessing to nationally profiled, occupational health cases in multiple states.
• Executed reduction of >70% respiratory personal protective equipment for potent compound isolators as result of statistical analysis of occupational hygiene data, saving time and materials and eliminating need to transport active pharmaceutical ingredients between facilities.
• Identified and addressed the mysterious source of staphylococcus biohazard in canning industry to address epidemic and prevent further widespread infections among workers.

Management

• Developed and instituted IH programs through effective change management process, impacting 85 countries, increasing engineering control implementation and reducing need for quantitative-evaluation consulting services by over 20%.
• Planned and executed highly potent (HPAPI) compound containment risk assessment and management strategy, achieving 50% improvement in potent compound containment across global manufacturing in 5 years, fully engaging engineering, operations and EHS communities in reaching goal.
• Designed sustainable industrial hygiene risk assessment strategy and tools, addressing prioritization of industrial hygiene goals and resources, resulting in 32% increase in manufacturing site exposure assessments and global program engagement.
• Reviewed, planned, and prepared EHS response to Statement of Work for TPMs, required for first trial as third-party manufacturer in clinical supply operations, leading team in completing multiple rounds of production of highly potent compound for other major pharmaceutical companies in collaboration with global pharmaceutical operations in high-containment facility.

Training

• Served as volunteer leader for past 9 years for globally-endorsed Occupational Hygiene Training Association (OHTA) for development and proliferation of free, public-domain training modules, collaborating in creating module materials taught in over 55 countries and officially training over 8000 students regarding OH technical skills to universally impact and grow occupational hygiene profession.
• Directly addressed IH competency in global corporations by implementing training curriculum, impacting over 100 health and safety staff by providing endorsed training materials and tools for manufacturing-site-level industrial hygiene programs.

Good Morning America Interview Link

View Nancy McClellan's Expert Witness Profile.