Highway - Traffic - Transportation Accidents Expert Witnesses: 13

4CA Consulting & Reconstruction is a General Accident Reconstruction Company, providing Expert Services in the field of Accident Reconstruction, including:

• A complete an unbiased accident investigation, using the latest investigative means such as Crash Data Retrieval & Analysis.
• Crash Scene Analysis and Documentation: Vehicles, light trucks, motorcycles.
• Seat Belts and Child Safety-Seats usage analysis
• Occupant injury kinematics, speed determination, time - distance, drag factor with use of Vericom Vehicle Computer System.
• Traffic Studies.
• Crash Animation / Simulation, Map scenes, Crash Zone, CAD.

About Kevin Forcier: ACTAR Certified Reconstructionist: #2054. Retired from the Pennsylvania State Police in April of 2010 after 25 years of service. Accident Reconstructionist since 1990, last four years as a full time Crash Analysis and Reconstruction Specialist responsible for the coverage of 3300 square miles of Northwestern Pennsylvania. Qualified Expert Witness in the field of Crash Reconstruction and related services.

Peter J. Sullivan is a World Class Certified ASE Technician and ASE Certified Master Technician in Heavy Duty Truck, Passenger Car / Light Truck, Collision Repair, and Machinist, (National Institute for Automotive Service Excellence). He has over 35 years of technical, academic, operational, and managerial experience in the private and commercial transportation, heavy equipment, marine, and recreational vehicle industries.

Mr. Sullivan has extensive experience performing vehicle inspections and downloads of event data recorders and electronically stored information (ESI), including analysis, validation, testing, and preservation on almost all makes and models of vehicles and equipment.

Litigation Support - Mr. Sullivan utilizes his comprehensive legal, technical, and FMCSA / DOT knowledge to specialize in:

Product Defect Cases Driver or Motor Carrier Compliance Electronic Engine Control (ECM) Electronic Throttle Control Electronic Power Steering

Anti-Lock Brake Supplemental Restraint Computerized Systems Closed-loop Systems Hydraulics

He and his team perform accident site and vehicle inspections, perform data downloads, including analysis, on most all makes and models of vehicles and equipment, reconstruct accidents, perform exemplar and product testing, metallurgical testing, fluid analysis, and CMV driver and motor carrier compliance analysis. His primary areas of expertise include medium duty / heavy duty truck, hy-rail, light duty car / truck, motorcycle, ATV, marine, heavy equipment, machinery, tire, bicycle, commercial motor carrier safety and DOT compliance, and commercial motor vehicle driver / operator qualification and compliance, and job site safety.

Mr. Sullivan's services are available to counsel representing both Plaintiff and Defense. His litigation support services also include expert reports, depositions, and testimony for trial, OSHA, and governmental hearings.

View Peter Sullivan's Consulting Profile.

Jason Young, BESc., MASc, PEng, is the President of Advantage Forensics Inc., a multi-disciplinary forensic engineering firm in Ontario with service across Canada and the U.S., including N.Y., Michigan, Ohio, Penn., Mass., Vermont, California, Nevada, Arizona, Texas, Missouri & Hawaii. Mr. Young is an outstanding seasoned expert in collision reconstruction, human factors, biomechanics, patent infringement, and waterparks with an exceptional track record at mediation and trial. 

Our firm was VOTED #1 EXPERT WITNESS in Accident Investigation & Reconstruction in Canada.  We have conducted thousands of forensic investigations with tremendous success at trial for our plaintiff & defence clients in:

• Collision Reconstruction - pedestrian, nighttime visibility, motorcycle, bicycle, truck, data recorder download & analysis, freeway collisions, computer simulation, winter maintenance, road design, forensic video analysis, snowmobile, Segways
• Human Factors - perception reaction time, driver behavior, road signage, warnings & labels, product misuse
• Slips, Trips & Falls - friction testing, staircase building code assessment, fall hazard assessment
• Biomechanics - seatbelt use, injury thresholds, fraud investigation, fall dynamics, occupant ejection, whiplash & concussion thresholds
• Product Failure - materials failure, design assessment, safety factor testing, electrical failure
• Playground, Fitness Equipment & Sports Accidents - playground, exercise equipment, marine, trampoline, ski, sports facilities
• Waterpark, Pool, Zipline & Amusement Ride Accidents - waterslides, friction testing, zipline, aerial adventure, acceleration testing 
• Fire & Explosion Investigation

Our team of over 30 experts and consultants provides the full complement of forensic, academic, research & courtroom experience.

Mr. Young is a licensed professional engineer and seasoned expert with over 20 qualifications at Superior Court level, over 20 publications, and 2500 forensic investigations with 1500 trial-ready reports over 20 years in Collision Reconstruction, Human Factors, Biomechanics, Patent Infringement, Road Design & Waterslide Design. 

Mr. Young has a Masters in Biomedical Engineering and a Bachelors in Mechanical Engineering, as well as numerous certifications and contributions to standards in these areas. Mr. Young has provided seminars to law conferences for over 15 years on these topics. Mr. Young is a long-time member of CATAIR, HFES, CARSP, and ASTM. See our website at www.aforensics.ca for additional information. We also offer the option of fixed file quotes GUARANTEED within 10%. View Advantage Forensics' Consulting Profile.

Richard F. Beaubien, PE, PTOE is a Professional Traffic Operations Engineer and Managing Director at Beaubien Engineering. He was previously Transportation Department Head at Hubbell, Roth & Clark, Consulting Engineers for more than 23 years. Mr. Beaubien's employment experience includes 5 years as a highway engineer with the Federal Highway Administration and 14 years as the traffic engineer for the City of Troy, Michigan. Mr. Beaubien is a past International President of the Institute of Transportation Engineers and the past President of the Intelligent Transportation Society of Michigan. He currently chairs the Metro Detroit Traffic Incident Management Coordinating Committee. Richard Beaubien is a registered professional engineer in several jurisdictions.He has been certtified by the Transportation Professional Certification Board as a Professional Traffic Operarations Engineer and a Road Safety Professional.   His litigation support services are available to attorneys for both Plaintiff and Defense. He has testified in court several times. Specialty Areas:

Municipal Traffic Engineering Transportation Planning Traffic Engineering Highway Design Road Traffic

Traffic System Operations Road Safety Intelligent Transportation Systems Traffic Incident Management

View Richard Beaubien's Consulting Profile.

Carl Berkowitz, PE, Ph.D., AICP, is a Transportation and Traffic Engineering expert with almost 50 years of expertise. He's held various managerial and administrative positions in the transportation industry, government, private, and academic sectors.

Dr. Berkowitz has extensive multi-modal experience in planning, design, engineering, safety, security, construction, maintenance, operations, and management. He has written and edited numerous reports, studies, articles, and columns for major publications, journals, newspapers and scholarly periodicals.

Background Experience:

• Transportation and Traffic Engineering Consultant, 1988 - Present
• New York City Department of Transportation, New York, 1970 – 88
• New York State Office of Planning Coordination, New York, 1967 - 70
• New York State Department of Transportation, Babylon, NY, 1963 - 67
• New York City Transit Authority, New York, 1962 - 63

Litigation Support - Dr. Berkowitz has served as a litigation consultant since 1997.  He has the background and experience to make him ideally suited to contribute important information at every stage in the litigation process. Dr. Berkowitz is able to explain complex issues in layman terms, suggest strategies, investigate and uncover facts, perform literature reviews, research, and prepare safety evaluations. He has been deposed / testified over 50 times in the last 5 years.

Accident Investigation & Reconstruction Slip Trip & Fall Pedestrian & Bicycle Safety Railroad Safety Bus & Truck Safety Biomechanics & Human Factors Student Safety FELA & OSHA Accessibility / ADA Parking Lots & Garages

Construction Safety Elevators & Escalators Equipment & Machinery Traffic Engineering Traffic Lighting / Visibility Transportation Engineering Transportation Safety Transportation Rules & Regulations Terminals Walking & Working Surfaces

" WHO IS AN EXPERT?
ONE WHO HAS ACQUIRED COMPREHENSIVE SPECIFIC EDUCATION,
ADVANCED AND CONTINUING TRAINING, AND EXTENSIVE SPECIFIC
EXPERIENCE TO GAIN THE KNOWLEDGE AND AUTHORITATIVE ABILITIES
REPRESENTING THE MASTERY OF THE SPECIFIC FIELD AND OF THE SUBJECT."

Nation Wide and International Expertise.

Timothy G. Galarnyk: Educated in Construction and Safety.  Continued Training in Construction and Safety. More than 45 Years of HANDS-ON Field Experience. Actively involved in construction since 1976. Equipment operator, member of International Union of Operating Engineers since 2004, Certified by ATSSA in Construction Work Zone Traffic Control - MUTCD since 1988. More than 1,000 Incidents Independently Investigated. 

Traffic Crashes in Construction Work Zones - Related to MUTCD Compliance. CERTIFIED by ATSSA in Work Zone Traffic Control since 1988. 

Construction Risk Management, Inc., is a corporation with experts in construction safety, structure collapses, construction means and methods, and construction work zone traffic control.  Investigation focuses on:

Bridges, Buildings, Residential, Industrial, Commercial, High-Rises, Marine, Highways, Underground, Water, General and Subcontractor Issues

Litigation Support - We conduct Forensic Investigations of Construction Accidents / Injuries / Deaths to establish the Cause. What happened? How did it happen? Where and When did it happen? Why did it happen? Who is Responsible? Depositions and Trial Experienced. State and Federal Courts. Defense and Plaintiff - Makes no difference as the case facts and evidence rules. 

Areas of Expertise (include but not limited to):

Scaffolding Cranes Rigging Earth Moving Equipment Aerial Lifts Forklifts Trenching / Excavating Falls Steel Erection Electrical Injuries / Electrocution

Confined Spaces Concrete Work OSHA Issues Bridge / Building Structural Collapse Trucking of Construction Material Steel Materials Reinforcing Bars Concrete Pilings Loading / Unloading Injuries

Dean Tekell Consulting provides expertise in the areas of Traffic Engineering, Parking, Public Transit, Vehicle Dynamics, Accident Reconstruction, and Technical Accident Investigation.

Often, government agencies, consulting engineers, architects, developers, business institutions, and attorneys must know how to move people and their goods safely and efficiently. The firm offers advice on site selection, traffic access, and traffic circulation on the site. The firm provides insight into potential problems with zoning and subdivision regulations. Traffic impact studies, traffic signal warrant analysis, traffic signal design and permitting services related to development activity are also available through the firm. Parking garage and parking lot operations are specialties offered to business institutions.

Other services include: Queuing Studies for drive-through services; Traffic Calming and neighborhood speed control; School trip and pedestrian safety plans; Traffic Accident Reduction and highway safety techniques; Transit Funding Operation; Intelligent Vehicle-Highway Systems.

The four PhD and registered PEs at Miller Engineering are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. We have a dedicated office with a full time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise covers well the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. The areas listed below are from actual projects completed in our 40 years of history. 

Vehicles Car/Truck Accident Reconstruction Crash Data Retrieval (CDR) Visibility & Reaction Time Analysis Tires, Trailers, Brakes & Accelerators Truck/Off Road Vehicle Egress/Ingress Traffic Signing and Construction Zones Electronic Vehicles Mechanical & Electrical Safety Product Safety & Analysis Machinery - Metal, Wood, Plastic Molding Machine Guarding & Safety, Robots, Automation Hazard and Risk Analysis Employee Safety Procedures – OSHA Electrical Distribution & Transmission Hazards

Warnings & Instructions Warning Labels & User Manual Design Hazard Analysis & Product Label Designs Medical Device & Drug Warnings & Instructions Inadequate Warnings Analysis Standard Compliance (ANSI Z535) Product Recall Information & Strategies Consumers/Household Safety Appliances & Tools Child Furniture, Choking, Playgrounds Swimming Pools & Exercise Equipment Recreation - ATV, Boats, Bicycles, Boards Ladder, Stair, Step and Railing Accidents Slip, Trip, & Fall Accidents CPSC Recall Information & Strategies

Chemicals Safety & Labeling NEW OSHA HAZCOM (2012) & GHS Review MSDS, SDS and Product Label Compliance Toxic Torts - Diacetyl, Asbestos, Benzene, Lead, Carbon Monoxide Vaping & E-Cigarette Health Effects Chemical Exposures & Workplace Safety Chemical Inhalation, Ingestion, Dermal Contact Contamination - Water & Environmental Manufacturing & Process Line Accidents Slips, Trips, Falls, & Entanglements Fires & Explosions Cause & Origin Investigations Gas, Vapor, & Electrical Spontaneous Combustion Vaping & E-cigarette Battery Failures Fire Control & Explosion Issues

Agriculture Tractor & Equipment Accidents Chemical Applications & Exposures Crop Storage & Harvesting Accidents Pesticides Construction Vehicle Visibility Accidents Slip, Trip, & Fall Accidents Power Tool Repetitive & Immediate Injuries Scaffolding - Cranes - Hoisting - Fork Lifts Insurance Subrogation & Forensics Accident Investigations Electrical & Fire Causation Chemical Leakage Damage Defective Equipment Injuries Premise and Process Damages

James M. Miller, PE, PhD – Founder  Dr. Miller is an Emeritus Engineering Professor at the University of Michigan. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with CPSC regarding safety and product recalls. Dr. Miller often works on projects relating to compliance with occupational safety standards, provides upper management guidance on product design, recall and liability issues, and serves as an expert witness.

Mark R. Lehto, PhD – Co-Founder Dr. Lehto is a Professor of Engineering at Purdue University. He completed his Ph.D. in engineering at the University of Michigan, where he specialized in Human Factors Engineering, in particular Warnings and Labeling. Dr. Lehto specializes in knowledge engineering, warnings and instructions, structuring expert systems, accident modeling, accident statistical analysis, consumer product safety, boating safety, in-field national surveys of product usage, and product information effectiveness.

David R. Clark, PE, PhD – Co-Founder Dr. Clark is an Emeritus Engineering Professor at Kettering University. He was an engineering PhD graduate from the University of Michigan, where he specialized in human factors engineering and system safety analyses. He has a special expertise in electrical fire- and explosion-related accidents, and has extensive experience working for loss control companies, performing over 150 fire origin and cause investigations in the past few years.

Adam M. Olshove, PE, MSE – Engineering Manager Mr. Olshove has over 10 years of experience providing consulting services to industry and the legal profession. He holds an MS in Mechanical Engineering with a focus on control systems and battery modeling (2019), and a BS in Mechanical Engineering (2012), both from the University of Michigan. He has performed dozens of on-site investigations nationwide in relation to consumer product design and industrial accidents, including failure analysis and testing.

Jeffrey D. Rupp, MSE – Engineering Associate Mr. Rupp has a BS in mechanical engineering from the University of Michigan and a MS in systems engineering and engineering management from Wayne State University. Among his company affiliates is 26 years with Ford Motor Company and Volvo Car Corporation, where he was involved in crash development and crash sensing calibrations.

Established in 2000, Laird are an Expert Witness services firm supporting the Legal sector across the UK. They understand the importance of providing an efficient and seamless customer journey and review their processes continually to ensure that they achieve and surpass expectation levels daily.

With constantly evolving IT systems and exceptional customer service, Laird are leading the way in the Expert Witness sector. You can instruct with the click of a button via their website and will be kept up to date at every stage of your case.

Laird have three main areas of expertise:

Automotive Experts

Vehicle Damage Reports Low Velocity Impact Diminution in Value Desktop Reports

Vehicle Valuation Disputes Accident Reconstruction Pre and Post Repair Inspections Vehicle Data Check

Photography Experts

• Locus Reports
• Personal Injury Photography Reports

Language Experts

• Interpretation
• Translation
• Witness Statements
• Document sign up service

Quality Forensic Engineering, LLC is a full-service forensic engineering firm, providing engineering support to clients in the areas of accident reconstruction, biomechanics, fire investigations, patent litigation analysis, premises liability, product liability, and tire failure analysis. We use the latest technology and industry proven techniques to provide thorough analysis and conclusions for the most difficult engineering questions. Our forensic engineers support clients throughout the U.S. Headquartered in Tallahassee, FL, we have locations in Jacksonville, FL; Melbourne, FL; Tampa, FL; Indianapolis, IN; New Orleans, LA; San Diego, CA; Charlotte, NC; Columbia, SC; and Tucson, AZ.

Dr. Brian Pfeifer, PhD, PE - Dr. Pfeifer is an Engineering Expert with over 25 years of experience investigating thousands of cases involving a variety of forensic engineering issues. He is a leading expert in accident reconstruction, roadside safety, maintenance of traffic, commercial vehicle accidents, pedestrian accidents, bicycle accidents, and the analysis of mechanical systems and product failures. Dr. Pfeifer has a strong background in the design, development, and implementation of roadside safety hardware including guardrails, bridge rails, and crash cushions. Over 33 patents have been filed worldwide on behalf of Dr. Pfeifer and associated colleagues who invented safer guardrail systems, vehicle storage systems, shipping container handling systems, and material handling and storage methods. He has also utilized his technical knowledge and understanding of patents to assist in a number of matters involving patent litigation.

Dr. Pfeifer has published numerous papers to various organizations, covering topics such as new guardrail systems, energy absorbing guardrail terminals, breakaway sign mechanisms, and material handling technology. He has shared his expertise with many organizations on topics including vehicle collisions, bicycle accidents, roadway construction zones, and accident reconstruction expert witness utilization. Dr. Pfeifer is a registered Professional Engineer in nine states and he continues to refine his skills and knowledge of accident reconstruction and roadside safety by staying current with new technology and best practices. Dr. Pfeifer has extensive experience with providing deposition and trial testimony as an Engineering Expert. See Full Bio & CV.

Expertise:

Automobile Collisions Tractor-Trailer Collisions Guardrails / Bridge Rails Construction Zones Bicycle Accidents Pedestrian Accidents Motorcycle Accidents Occupant Kinematics

Roadside Safety Airbag Control Module (ACM) Analysis Tractor Trailer Electronic Control Module (ECM) Analysis Product Failure Analysis Maintenance of Traffic (MOT) Evaluation Restraint System Analysis Patent Litigation Technical Analysis

Dr. Ian M. Zeller, PhD, ACTAR, is an accomplished engineer with more than 10 years of experience in Biomechanics and Computational Dynamics fields. He has investigated hundreds of cases ranging from motor vehicle accidents, recreational incidents, medical device designs, as well as injuries from product liability all across the United States. 

Dr. Zeller has graduate level experience in computational dynamics and orthopedic biomechanics with a specific emphasis in dynamics, vibrations, joint contact mechanics, and muscle control during static and dynamic loading applications. Dr. Zeller’s past research includes clinical and computational analysis of the human body with respect to the design and implantation of orthopedic devices for the knee, hip, and spine. He has published in peer-reviewed journals and presented research at both technical and surgical conferences in North America, Europe, and Asia. Dr. Zeller also worked with surgeons across the United States in the design and assessment of knee replacement devices, including personalized and prototype devices to optimize for efficacy and safety. 

Dr. Zeller is also accredited as a traffic accident reconstructionist and continues to conduct research as well as maintain a current knowledge of developing trends and best practices in the biomechanics and engineering fields. Dr. Zeller has published to various organizations on topics ranging from knee replacement design, forward solution modeling, joint mechanics, personalized joint replacements, material structures and properties as well as biological modeling of disease distributions. He also has an extensive testifying history including depositions, trials, and arbitrations.

 See Full Bio & CV.

Expertise:

Biomechanical Analysis Accident Reconstruction Injury Consistency Mechanism of Injury Analysis Vehicle Occupant Kinematics Falling Object Mechanics and Analysis Bicycle Accidents Pedestrian Accidents Amusement Park and Playground Accidents Crash Data Retrieval and Analysis

Product Failure Analysis Seat Belt Analysis Restraint System Occupant Position Determination Sequential Events Analysis Speed Analysis Vehicle Damage Consistency Collision Avoidance Material Fracture Analysis

Michael R. Hill, PhD, PE, is a Biomechanical Engineer passionate about applying biomechanics techniques to solve diverse problems in forensics, medical research, engineering, biology, science, and mathematics. He is an expert in experimental, theoretical, and computational Tissue Biomechanics, with a focus on injury mechanisms, human tissue damage, and nonlinear soft tissue mechanics.

Dr. Hill’s core strengths are in orthopedic and cardiovascular biomechanics, vehicle accident reconstruction, injury consistency analysis, mechanical design, instrumentation, experimental analysis, numerical methods, simulation, statistics, and image processing. Dr. Hill has lectured in the field of biomechanics and numerical methods, and his research has been published in 16 academic articles and presented at 40 international and national scientific conferences.

See Full Bio & CV.

Expertise:

Vehicle Accident Reconstruction Occupant Kinematics Orthopedic and Cardiovascular Biomechanics Human Tissue Damage Mechanics Slip, Trip, and Fall Analysis

Computational Mechanics  Experimental Biomechanics Image Analysis Computational Modeling Event Date Recorder (EDR) Data Retrieval and Analysis Automobile Restraint Analysis

View Quality Forensic Engineering's Industrial Forensic Engineering Expert Witness Profile.

Dr. Shakir Shatnawi, PhD, PE, is a nationally and internationally recognized expert in the Transportation Engineering industry. Shakir has a Ph.D. in Transportation Engineering. He has over 30 years of practical and extensive engineering and transportation expertise covering industry and public agencies including FHWA and the California Department of Transportation (Caltrans). 

Shakir is currently the president of Shatec Engineering Consultants. He taught highway engineering, traffic engineering and transportation engineering and pavement design at California State University. Dr. Shatnawi served as a principal investigator on multi-million dollar transportation projects. He held various positions at Caltrans including a Senior Transportation Engineer, a Supervising Transportation Engineer and a Division Chief.

 Dr. Shatnawi's education and experience demonstrates a wealth of engineering knowledge encompassing highway design, traffic engineering, pavement design, geotechnical engineering, materials and construction . As a recipient of many acknowledgements from the government, Dr. Shatnawi has an impeccable reputation within the industry for his significant professional contributions. As an expert orator, he frequently shares his knowledge at major conferences around the world. Dr. Shatnawi provides expert witness services in the following areas:

Traffic Engineering Highway Design Standards Highway Specifications / Guidelines Public Agency Policies / Practices Pavement Design / Materials Construction defects Highway Geometric Design Drainage Asphalt Concrete Highway Repairs / Maintenance

Construction Quality Control / Quality Assurance Construction Claims Surface Conditions - Friction, Skid Resistance Road Defects Traffic Safety Highway Safety Traffic Control Devices / MUTCD Sight Distance Requirements Roadside Hazards ADA Requirements Code Violations

View Dr. Shatnawi's Consulting Profile.

Scott L. Turner is a highly qualified Commercial Motor Vehicle (CMV) Transportation Expert, FMCSR Regulatory and PHMSA-HMR Expert with approximately 30-years experience in the highly specialized field of CMV crashes and incidents, and 16 years as the CEO of a nationwide CMV crash & HazMat disaster response corporation. 

Mr. Turner's career includes personal response and/or investigation of over 1,000 CMV crashes, 200 cargo-tank truck crashes/incidents and a multitude of industrial setting incidents including fixed facilities, loading docks and loading rack disasters. His FMCSR and PHMSA knowledge (Federal Enforcement Training), detailed reporting and testimony can be a focal point of any civil litigation, where commercial motor vehicle crashes and/or transit incidents are at issue, with or without hazmat involvement. Mr. Turner is qualified in both the Federal Court system as well as multiple States throughout the United States and testifies on an approximate 50/50 average of Defense to Plaintiff ratio.

Areas of Expertise:

• Level 1 FMCSA Inspections
• Commercial Motor Vehicle (CMV) Post-Crash Inspection
• CMV Post-Crash Investigation
• Driver Qualifications
• HOS / Fatigue Driving
• Motor Carrier Fitness Standards
• Safety Programs
• Trucking Industry Standards
• Cargo-Tank Truck Incidents / Crashes
• CMV loading/Off-loading Cases (van, cargo-tank, flatbed)
• Flatbed, Cargo Securement Failure
• Loading Dock Incidents w/ CMV
• Forklift Incidents w/ CMV
• CMV Crash Involving Hazmats
• Loading Rack Explosions / Disasters
• Pedestrian v. CMV Incidents

Services Include:

• Litigation Support
• Trial Preparation Consulting
• Courtroom Testimony
• Commerical Vehicle Accident Investigations
• CMV, Highway Construction Zone Crashes
• CMV Loading and Offloading Investigation
• Level 1 FMCSA Audits
• Load Securement Incidents

Dan W. Wall, BSME, specializes in the fields of Accident Reconstruction, Biomechanics and Motor Vehicle Injury Causation, Human Factors, and Injury Prevention in Motor Vehicle Design. Mr. Wall is fully accredited with ACTAR (Accreditation Commission for Traffic Accident Reconstruction), ACTAR No. 1140.

Dan Wall has conducted scientific and engineering analysis of motor vehicle collisions since 1987 for both plaintiff and the defense in civil and criminal cases. A qualified expert witness since 1987, he has offered litigation support services to insurance companies and attorneys in Arizona, California, Colorado, Tennessee and Louisiana and has testified in both Civil and Federal Courts.

Mr. Wall's past cases have involved commercial vehicle design and analysis, insurance investigations, low speed collisions and injury analysis, motorcycle collisions and rider analysis, vehicle handling and dynamics, seat belt analysis and injury mitigation, tire failures and rollover analysis, general accident reconstruction, and roadway analysis. He has conducted human factor analysis including reaction and perception, environmental effects, and general driver behavior. With a large library and the tools needed to do all types of motor vehicle reconstruction investigations, Mr. Wall is an asset to any team.

Dan Wall currently owns and rides a Harley Davidson Ultra Electra Glide Classic motorcycle and has gone through various levels of motorcycle training. He also has extensive experience as a boat operator and Marine Instructor.

For more information, visit www.wallaccidentreconstruction.com

Also view Dan Wall's article in Attorney At Law Magazine at http://attorneyatlawmagazine.com/phoenix/2014/01/17/accident-reconstruction-expert-dan-wall/

Areas of Expertise:

Mechanical Engineering Biomechanics Human Factors Accident Reconstruction Failure Analysis Forensic Investigation Motor Vehicle Design Dynamics and Handling Motorcycles Commercial Vehicles Rollovers Signage

Conspicuity Low Speed Collisions Marine Safety Bicycles Slip and Fall Accidents Pedestrians Accidents Tire Failure Seat Belt Issues Road Defects Off Road Driving Accidents Construction Zones Product Liability

View Dan Wall's Consulting Profile.