Mechanical / Plumbing / Piping / HVAC Construction Expert Witnesses: 20

Robert (Bob) Ryan, PhD, PE, is a Senior Estimator with Heavy Civil Construction experience including bridge / structures, paving, foundations, marine, and grading work. He has over 15 years of experience working within the construction industry, primarily in operations and estimating. He has completed projects totaling more than $2 billion, and was directly involved in multiple projects receiving national merit.  

Bob has led projects involving bridges, roads, marine structures, rail, tunnels, airports, and light industrial. His project management experience has led to the development and deep understanding of schedules, standardized cost estimating approaches, subcontractor management, contracts, procurement, project completion, and Disadvantaged Business Enterprise (DBE) programs compliance issues.

Litigation Support -  Working as a contractor, engineer / consultant, and owner in the heavy-highway sector gives Bob the ability to see all sides of complex contractual issues. He has been involved in cost escalation claims and economic impact analysis related to volatile market conditions. He has experience working on large, complex heavy highway projects and has the skills and knowledge necessary to provide expert testimony in these cases.

Bob has advised attorneys for both plaintiff and defendant, and executive levels of DOTs and contractors alike. He has led and supported expert analysis on claims exceeding $100 million.

 Areas of Expertise:

Dispute Resolution Disadvantaged Business Enterprise (DBE) Issues Good Faith Effort (GFE) Claims Contract Issues Cost Estimating Contractor Performance

Contractor Means and Methods Construction Planning and Scheduling Construction Defects Forensic Schedule Analysis Financial Damages Preparation and Evaluation Code Compliance

Background Experience - Bob’s professional roles have included project controls, field engineering, superintendence, project management, and estimating. In his 10 years as a contractor, he held roles from field operations to estimating. As a consultant, he managed projects ranging from $1M to $300M. As an owner’s representative Bob was responsible for complete cost estimates averaging $2B. Bob is currently a faculty member at Oregon State University in their Construction Engineering Management program. 

Bob has successfully balanced completing his multiple degrees while exceeding goals as a full-time professional. His dissertation involved economic analysis of cost variance for over 12,000 projects. His coursework was a blend of project management, civil engineering, accounting, economics, and statistics. He is experienced in a wide variety of alternative delivery methods such as design-build, public-private- partnerships (P3) accelerated bridge construction, job order contracting, and negotiated lump sum.

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC has over 30 years of experience in the Engineering, Architectural, Construction, and Building Design industry. He provides his clients with a comprehensive knowledge of Engineering, Construction Technology and Construction Standards of Professional Practice. 

Background Experience - President of an “active” Design and Building company with a professional staff and Headquarter offices in San Jose and Los Angeles, and offices in Sacramento and San Francisco. Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes building and roadway design, construction, management, with designs of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrans, and BART. 

Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation, Traffic Engineering, Hydraulic Engineering, Safety Expert, OSHA Standards, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert. “Our bids are not just a tool but are numbers that we be use to finish the work, accurately, on-time, and safely.” 

Forensic Construction and Engineering - Mark Rieser is a renowned forensic expert with the knowledge to safeguard clients from unwanted litigation as well as support both plaintiffs and defendants. He works closely with insurance companies and attorneys on various public, city, and state cases throughout the western United States. To date, he has been designated as an expert in over 550 Forensic Construction and Engineering cases throughout the United States. Mr. Rieser has been designated and testified Court as an expert in the following categories:

Traffic Engineer Transportation Engineer Architect Safety Expert General Building Contractor Civil Engineer General Engineering Contractor Roofing

Estimator Soils Caltrans Standards Structural analysis Hydraulics OSHA Standards Construction Management Waterproofing

NorCal Headquarters San Jose Office 2033 Gateway Pl Suite 500 San Jose, CA 95110	San Francisco Office 425 Market St Suite 2200 San Francisco, CA 94105	SoCal Headquarters Los Angeles Office 10100 Santa Monica Blvd. Suite 300 Los Angeles, CA 90067	Sacramento Office 777 Campus Commons Rd Suite 200 Sacramento, CA 95825

View Mark Rieser's Consulting Profile.

Since 1988, Real-World Forensic Engineering, LLC ("RWFE") has provided engineering services to industries and government labs, as well as litigation support to both plaintiff and defense attorneys practicing in many areas.

RWFE Areas of Expertise Include:

Components & Machinery Metallurgy & Corrosion Dynamics of Impact & Collisions Friction Analysis / Slips, Trips and Falls Intellectual Property & Patent Review Accident Reconstruction / Animation Computer Aided Design Education & Training

Electrocution & Switch Malfunction Grounding & Lightning Protection Lightning Impulse Testing Products and Premises Liability & Safety High-Voltage & Current Power Systems Bridge Design and Safety Fire & Explosion Cause and Origin And Much More...

At RWFE, we proudly distinguish ourselves by our Four C's:

CREDENTIALS. COMPETENCE. CREDIBILITY. COMMUNICATION.

Credentials:	B.S., M.S., M.Eng., M.B.A., J.D., and Ph.D. Degrees Licensed Professional Engineers in Mechanical, Electrical, and Civil Engineering Tenured University Professors and Professionals NAFI Certified Fire and Explosion Investigators (CFEI) Licensed Master Electricians
Competence:	Over 80 Combined Years of Experience in Engineering R&D, Industry, Academia, Consulting, and Expert Witness Litigation Support Over 120 Combined Deposition and Court Testimonies
Credibility:	Internationally Recognized in Our Areas of Expertise More Than $19 Million in Peer-reviewed and Funded Research Grants Over 200 Combined Scientific Publications and Journal Articles
Communication:	Over 20 Different Undergraduate and Graduate-level University Courses Over 30 Invited Short Courses, Talks, and Lectures

Design Evaluation – Accident Investigation – Intellectual Property - Failure Analysis – Fire Cause & Origin – Component Testing - Computer Aided Drafting – Accident Animation - Expert Witness & Litigation Support

www.ExpertEngineering.com

Tim Keane is recognized nationally and internationally as a Leading Expert on methods to Control, Mitigate and Assess the Risk for Legionella in building and industrial water systems. He has published articles and books on the subject and has co-written regulatory documents including the 2018 and the 2015 ASHRAE Standard titled: Legionellosis: Risk Management for Building Water Systems,  ASHRAE Guideline 12 titled: Managing the Risk of Legionellosis Associated with Building Water Systems, 2005 Guidelines for Ornamental Fountains and the 2000 ASHE Advisory. Mr Keane has over 25 years experience in water system consulting and over 10 years experience in facility design, construction and operation. Legionella Risk Management, Inc. provides consulting services for Effective Engineering Solutions to Engineering System Pathogens including; outbreak investigation, root cause analysis, control and remediation of legionella from water systems in commercial buildings, healthcare and industrial facilities.   We provide Litigation Support in this area.

Daniel D. Bawden, GMB, CAPS, CGR, CGP, JD, has over 35 years of experience in the Construction Industry. He is a Graduate Master Builder, Certified Graduate Remodeler, Certified Aging in Place Specialist, and a Certified Green Building Professional.

Mr. Bawden serves as an accredited Instructor for the National Association of Home Builders, certifying other builders in his own specialties. He earned both his Bachelor’s degree and Law degree from Baylor University. He is currently serving as Vice Chair of the NAHB Remodelers Council, on track to be the national spokesman for the remodeling industry in 2017.

Litigation Support - Mr. Bawden has an outstanding reputation for winning cases. His combination of legal and hands-on construction experience, along with his numerous certifications, make him a highly credible witness in all facets of residential construction.

Mr. Bawden helped write the "Residential Construction Performance Guidelines," which is the primary criteria for construction standards. With trial experience on behalf of both homeowners and builders, Mr. Bawden is a likeable persona, an excellent and clear communicator, effective before arbitrators, judges, and juries alike.

Areas of Expertise:

Construction Cost Estimates / Analysis Construction Defects Project Management Disputes

Construction for the Disabled (ADA) Construction Delays Code Compliance / Violation

View Dan Bawden's Consulting Profile.

David G. Shreve, PE,  is a licensed Professional Engineer in 18 states. He holds a certification from the National Council of Examiners for Engineering and Surveying (NCEES), is a LEED® accredited professional for Building and Construction and holds a Certified in Plumbing Design (CPD) credential. 

Mr. Shreve has over 30 years of experience in design, construction administration and forensic analysis of Mechanical, Plumbing, Fire Protection, and Energy Management Systems for commercial, institutional and residential projects. He is also a member of American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), American Society of Plumbing Engineers (ASPE) and International Code Council (ICC).

Mr. Shreve joined Ivey Engineering in 2014. His primary responsibilities include forensic analysis of HVAC, plumbing, fire protection and energy management systems. He also performs site inspections, testing, research, product analysis and cost estimating, and is responsible for writing reports and testifying in depositions, hearings and trials.

EXPERIENCE (partial listing)
∗ Approximately 300 HVAC, fire protection and plumbing design projects
∗ Approximately 10 LEED® design projects
∗ Approximately 20 feasibility studies
∗ Approximately 125 expert witness engagements

View David Shreve's Consulting Profile.

Andrew Allocco, PE, is a leading Construction Consultant, Florida Certified Contractor, Florida Licensed Public Insurance Adjuster and Real Estate Broker. With over 45 years of experience in his fields of expertise, Mr. Allocco's services are sought by individuals, corporations, developers, and law firms to oversee and advise on construction projects. He is the current owner of construction, real estate, and engineering consulting firms.

Background Experience - Mr. Allocco is the President of Indian River Construction Services, Inc. Prior to his current role, he served as the President of Better Homes Construction Services, Inc. of Miami, Florida, which performed in excess of 40,000 Building Inspections. As a Forensic Consulting Engineer, he inspects Commercial, Residential, and Industrial Facilities before, during, and after construction. He assists property owners with complex insurance claims, some of which involve significant and lengthy litigation

Mr. Allocco is not only licensed in the State of Florida as a Professional Engineer and Licensed Public Insurance Adjuster, he holds more Florida certified contractor licenses both presently active and past than any other individual in the State

Litigation Support - Since the early 1970s, Andrew Allocco has been an Expert Witness in many court and arbitration cases involving disputes between owners, builders, contractors, and architects. He has extensive knowledge of the court litigation process and has assisted law firms in providing facts and questions to be used during depositions and discovery motions. Mr. Allocco's services include inspection reports on the status of the property, depositions, trial testimony, arbitration, and mediation hearings.

Areas of Expertise:

Roof Analysis Balcony Inspections Structural Condition of Buildings / Drone Inspections Highrise Buildings Smart Buildings / Energy Use / Conservation Sick Buildings HVAC  Water Intrusion

Sewer Charges Swimming Pool Spa Fire Piping Motors Machinery Roads Fencing

Insurance Litigation and Structural Consulting - Mr. Allocco is also called upon by insurance companies and attorneys representing property owners to help adjusters evaluate loss. He has been retained to investigate the cause of structural failures, determine the extent of the structural damage, develop subrogation information, prepare the scope of repair, develop a repair design, draft specifications, and more. Mr. Allocco also has experience with code upgrades and notice of dangerous conditions, including hurricanes such as Hurricane Andrew.

View Andrew Allocco's Consulting Profile.

Prof. Makarand (Mark) Hastak, PhD, PE, CCP, CRIS, is the Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. Dr. Hastak has been involved with the construction industry for the past 35 years providing his expertise through consulting, research, teaching, and service to the industry. 

Dr. Hastak is a world renowned expert in the area of construction engineering and management including risk management, profitability of Construction companies, process improvement, disaster risk reduction, resilience and capacity building, infrastructure management, intelligent planning for the built environment, project control, project management decision-making, and strategic planning. As a Fellow of the American Council on Education (cohort of 2013-14) at Cornell University his work focused on the various facets of Hybrid RCM budget, engaged institution, and Public-Private Partnership in academia.

Dr. Hastak is a Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). He  has worked on numerous projects sponsored by the Construction Industry Institute (CII), NSF, State DOTs, and City Agencies. He is the current President of CIB (International Council for Research and Innovation in Building and Construction) and the Chair of the Advisory Board of teh Global Leadership Forum for Construction Engineering and Management programs (GLF-CEM). He also serves as an Academic Advisor to the Downstream and Chemicals Committee of the Construction Industry Institute (CII).

Dr. Hastak  has authored over 200 publications in his areas of expertise. He has co-authored a widely used book on Infrastructure Planning, Engineering, and Economics (McGraw-Hill 2006 and 2015). Dr. Hastak served on the Education Board of the Association for Advancement of Cost Engineering (2004-2016). He was Editor for two AACE books, the Skills and Knowledge of Cost Engineering (6th Ed. 2015) and the CCP Certification Study Guide (2nd Ed. 2016). He was also the Editor-in-Chief of the ASCE Journal of Management in Engineering (2009-2016). 

Dr. Hastak has given over 50 keynotes and invited lectures around the world. As a prominent educator and consultant, he also engages in developing training material and workshops as well as regularly teaching professional courses for the A/E/C industry. His services include consultation, on-site investigation, data collection, assessment, and reporting. He has completed the 30-Hour OSHA Hazard Recognition Training for the Construction Industry 

Dr. Hastak Lectures at the 2015 International Conference on Building Resilience

Litigation Support - Dr. Hastak offers expert witness services to attorneys representing both plaintiff and defendant. He has served as an Expert Witness on twenty-six (26) cases since 2017 and was deposed on eight plus two evidence depositions. His services include case reviews, written reports, depositions, and trial testimony as needed. 

Areas of Expertise:

Construction Engineering Construction Management Cost Overruns Schedule Delays Construction Safety/OSHA Modular Construction Patent Infringement

Factory Built Construction Infrastructure Planning Data Center Construction Project Risk Management Disaster Recovery / Disaster Mitigation Trade Secrets Misappropriation Contracts & Warranties

View Dr. Hastak's Consulting Profile.

Roger W. Griffith, P.E. is a professional Mechanical Engineer with over 40 years of experience in designing, maintaining, and operating mechanical systems (Plumbing, HVAC, and Fire Sprinkler Systems). As the principal of Griffith Engineering & Consulting for 23 years, his design experience with commercial and industrial projects includes convention centers, schools, office buildings, condominiums, apartment buildings, hotels, manufacturing facilities, medical buildings, restaurants, dormitories, fire halls, and maintenance facilities.

Litigation Support - Since 2002, Mr. Griffith has provided thorough, credible, and timely forensic engineering, consulting, and expert witness services. He also assists clients through the mediation and arbitration process. His expert testimony is based upon independent and impartial investigation, research, analysis, and testing. His services include written reports and the preparation of exhibits. Mr. Griffith's expertise is available to plaintiffs and defendants on the issues of plumbing, mechanical, and fire sprinkler system defects and failures. 

His specific areas of expertise include hot water scalding, carbon monoxide poisoning, and legionella. Mr. Griffith has served on numerous codes and standards committees related to areas, including the NFPA 54 Fuel Gas Code, the ASSE Scalding Awareness Task Group, the Uniform Codes' Legionella Task Groups, and the ICC Plumbing/Mechanical/Fuel Gas Code Action Committee. 

He is a Professional Engineer in Alabama, Arizona, Arkansas, Colorado, Florida, Georgia, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Michigan, Minnesota, Mississippi, Missouri, Nebraska, New York, North Carolina, Ohio, Oklahoma, South Carolina, Tennessee, Texas, Utah, Virginia, West Virginia, and Wisconsin.

Areas of Expertise:

HVAC Design Plumbing Design Pipe Failures Plumbing Component Failures Sprinkler System Failures

Hot Water Systems / Scalding  Water Heater Failures Gas Venting / Carbon Monoxide Poisoning Fuel Gas Fires and Explosions Legionella

View Roger W. Griffith's Consulting Profile.

Albert Ferrari, PE, CSP. is a Mechanical Engineer and Safety Professional experienced in both the micro and in the macro focus. Mr. Ferrari is particularly sensitive to reliability, safety, and function. His Forensic Engineering experience includes 30+ years in Accident Reconstruction, Causal Analysis, Failure Analysis, Codes, Standards and Regulations, Consulting and Testimony.

Mr. Ferrari provides Expert Witness Consulting and Testimony services to Defense attorneys, Plaintiff attorneys, Claims adjusters and Insurance companies. 

Engineering Work Includes:

• Automotive Engineering
• Pedestrian Facilities
• Machine Design
• Thermal and Mechanical Energy Analysis
• Structural Load and Stress Analysis
• Piping and Tanks
• System Safety and Human Factors Analysis for Design of Hazardous Equipment

Evaluations Include

• Cause of Injury, Loss and Damage
• Adequacy of Products, Systems, Materials, Practices
• Standard of Care of Design, Manufacturing, Use, Maintenance

Services Include:

• Investigation and Consultation
• Diagnostics, Testing and Analysis
• Technical Photography and Video
• Literature and Standards Studies
• Codes and Regulations Analysis
• Reports and Testimony
• Evaluations

• Over 35 years of experience in Mechanical / Structural Engineering & Design, Failure Analysis, Product Liability, Industural Asbestos,Pressure Vessel & Boiler analysis and evaluation of mechanical and structural components.
• Extensive trial experience. Has been involved in multi-million dollar cases. Areas involved included:

  
  

  - Piping & pipe supports - Structural failure of products - Failure analysis - Industrial asbestos - Seismic analysis - Fire protection - Pressure vessels

  - Tanks - Construction - Heat transfer analysis - Environmental qualification of equipment - Welding - Product design - Patent information

• Expertise in developing litigation rate-case exhibits and detailed supporting testimony, and in organizing case documentation into easy-to-use computer databases for trial use.

Robert F. Jalnos is currently a Managing Partner, CEO, and Responsible Master Plumber (RMP, 45 Years) for Dr J Plumbing Contractors, LLC. He has over 45 years of experience as a Licensed Master Plumber in the State of Texas. Mr. Jalnos also currently holds a Master Medical Gas Endorsement, and a Master Multipurpose Fire Sprinkler Endorsement with the Texas State Board of Plumbing Examiners. He is licensed and certified with the Texas Railroad Commission on the installation of LPG Gas Systems.

Qualifications:

• The installations of PEX, PROPRESS, Copper, Steel, Duriron, CPVC Piping. PVC and Cast Iron DWV below and above the foundation, Plumbing site preparation, Sewer, Septic Tanks, Potable Water, Natural and LPG Gas, Medical Gas, Multi-Purposed Fire Sprinkler systems and CSST systems. 
• All types of plumbing installations including Rough In, Slab Water Pulls, Top Outs, Fixture Setting, Sewer installation, Water Service installation, Underground and Above Ground Gas lines, Plumbing Service and Repair, as well as operating machinery for plumbing installations
• Expert Forensic Analysis of system failures
• U.S. Patent Laws pertaining to Plumbing Products
• Uniform and International Plumbing Codes 
• Certified Bathroom Designer (CBD) certified by the National Kitchen and Bath Association
• Certified Green Plumber

Litigation Support - Mr. Jalnos has provided expert plumbing analysis and forensic investigations for the past 20 years. His cases include all aspects of plumbing, materials, installation, workmanship, and problem solving. Mr. Jalnos has been retained in over 75 cases and offers services to attorneys for plaintiff and defendant.

David Morris has over 30 years of deep understanding and hands on experience of Construction and Construction Processes that give him a unique perspective in the industry. Having worked in many roles, Mr. Morris has the ability to formulate conclusions based on practical experience. Staying abreast of new technologies, he is able to apply them to outdated construction processes.

Mr. Morris has welding certifications in nearly all processes (MIG, TIG, Stick) and most materials, (Carbon Steel, Various grades of Stainless Steel, Aluminum, Chrome,). He has extensive experience in Instrumentation, Controls, Building automation Systems, HVAC, Refrigeration, Plumbing Codes and Design, Drafting and Detailing, layout and quantity take-off, medical gas installation, Plumbing and Piping Detailing, Computer Aided Drafting, and BIM

Litigation Support - Mr. Morris serves as an expert witness for attorneys representing both plaintiff and defendant. His services include onsite inspection, thorough reporting, depositions and trial testimony as needed. Cases include:

Construction Scheduling Root Cause Analysis Construction Defects and Delays Planning, Designing, Managing Construction

Mechanical, Electrical, Plumbing Coordination (MEP) Building Information Modelling (BIM) Computer Aided Drafting Initial Design, Construction, Operations, Maintenance

Select Background Experience:

• Prior to founding DMorris.consulting, Mr. Morris served as Director of Virtual Construction for EMCOR Construction Services from 2008-2016. In this role, he directed the virtual construction activities and operations of 82 EMCOR companies. His scope of work included drafting contract language for BIM and pre-construction, setting up new projects in lean and BIM delivery methods, and reviewing new construction technologies among other duties, Managing 3D and BIM processes
• From 2001-2008, Mr. Morris worked with University Mechanical and Engineering Contractors as Director of Virtual Construction. He was responsible for estimating Plumbing, HVAC Piping and Process Piping for numerous research laboratories and healthcare facilities valued at over 100mm + each. He also delivered conceptual estimates for numerous Biotech, Power, and Co-Generation plants.
• Select Project Participation: San Joaquin County Hospital, City of Gilroy Waste Water Reclamation Plant, Shafter Prison, Vandenberg Air Force Base HVAC Replacement, Space Shuttle Launch Complex Project, Tehachapi State Prison Level-4 High Security Prison Housing, Cal Poly San Luis Obispo Co-Gen Facility, Kern Medical Center New Hospital Wing Expansion, Anheuser Busch Yeast Plant Expansion, and multiple Piping, Petrochemical, Hospital, and School projects.

*This Mechanical, Electrical, Plumbing, and Fire Protection Systems (MEP) Spatial Coordination Requirements for Construction Installation Models and Deliverables is a derivative work of a best practice guideline written by David Morris in 2003 and modified for the AGC BIMForum in 2009. It is the result of capturing ten years of practical methods on real world construction projects and reflects continual feedback and improvement gained from that process.

View Dmorris.consulting's Business Consulting Profile.

David M. Bekus has over 40 years in the Construction Industry specializing in new home construction, and remodeling. Mr. Bekus has been a project manager, overseeing all aspects of construction from conception and approvals to final sales for single homes and developments. Mr. Bekus is licensed by the State of New Jersey as a building inspector (RCS, ICS, and HHS), a licensed home remodeler, and a licensed new home builder. He is also certified in Project Management, Cost Estimating, Construction Methods, Construction Site Safety, and is a EPA Lead Safe Certified Contractor. Litigation Support - As a seasoned expert in the construction field, Mr. Bekus provides comprehensive reports  and credible expert witness testimony. His services include project evaluations, building code inspections, and clear precisely written reports. Mr. Bekus' expertise is available to counsel representing both Plaintiff and Defendant and has testified in NJ superior court Areas of Expertise:

Industry Standards Building Code Compliance, Specifications Contract and Plan Specifications New Construction Defects Roof Issues Water Issues

Framing Defects Siding Defects Concrete Defects Insurance Claims Poor Workmanship Home Owner Association Issues

View David Bekus' Consulting Profile.

Michael A. Pollock, PE, USPTO, is a Mechanical Engineer responsible for the design and engineering of commercial, industrial, manufacturing, institutional, and residential venues, as well as efforts relating to services and products used in and around these facilities. Mr. Pollock's full CV can be viewed at cogentexpert.com.

Business and industries include electronics, safety and construction, building materials, polymers and plastics, instrumentation manufacturing, petrochemicals, chemicals, pharmaceuticals, colleges, athletic facilities, textiles, coatings and resins, food storage, biosciences, supermarkets, inks & pigments, automotive, facility and real estate operations, agricultural, transportation, nuclear, healthcare, nutrition, retail, distributors, pulp and paper, packaging, utilities, apparel, and R&D centers.

Litigation Support - Mr. Pollock is a subject matter expert in Commercial and Industrial Engineering Applications and Projects, as well as engineering standards and applicable codes (ASHRAE, ASME, NIST, NFPA, NBIC, ASTM, SAE, LEED, ASCE, GMP, ISA, BOCA, and EPA Regulations.) He has engaged with local, state, and governmental officials and agencies regarding numerous matters over his commensurate years of experience.

Areas of Expertise:

Investment Engineering Economics Mechanical Engineering Standard of Care Architectural Standard of Care Construction Delay Construction Defect Construction Schedule Analysis Accident Analysis Metallurgical Failure Rotating Equipment Electrical Failure Chemical Failure Processes Instrumentation and Controls

Chillers Coatings Refrigeration Thermodynamics Water Treatment Steam Systems and Boilers   Power and Utilities Energy Conservation Environmental Impact Safety HVAC Project Management Product Development

Registrations

• Professional Engineer: PA (PE075410)
• American Bar Association (ABA) – Construction Forum
• Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration)
• United States Patent & Trademark Office Registered (USPTO)                              

Forensic Consulting Experience

Warehouse Distribution Facility – Maryland - Evaluated a $10M (million) claim relating to purported construction defect claims by the 600,000 sq. ft. facility owner against the facility construction contractor and an original equipment manufacturer relating to installed infrastructure in the facility. Developed an expert opinion and expert report regarding the analysis of the purported defects and a proposed repair solution to correct said defects. 

 Psychiatric Hospital Facility – North Carolina – Evaluated a $28M (million) construction claim by the general contractor against a hospital facility concerning a $100M facility construction project.  Developed an expert opinion and report for general construction issues, constructability, design revisions, and corresponding delay analysis for mechanical, HVAC, electrical, smoke and fire, structural, security and building automation systems. 

Forensics Consulting Work-in-Progress 

• 2022 – International Trade Commission (ITC) Matter – Resin Manufacturing Facility Construction Delay / Completeness Analysis
• 2022 – Mechanical Systems Coatings Matter Analysis
• 2021 – Industrial Manufacturing Facility Standard of Care Matter, Construction Defect, Construction Delay     
• 2021 – Electrical Distribution System Construction Defect Matter, Standard of Care
• 2021 – Hotel Facility HVAC Materials of Construction Related Defect Matter